Epoxy Resin Adhesives and Potting Compounds

|

Processing

Cold-curing

Hot-curing

Components

2C

1C

2C

Optically transparent, high-strength

EP 601

EP 501

-

Optically transparent, flexible

EP 610

-

-

Highest temperature and chemical resistance

EP 660

-

EP 642

Biocompatible and autoclavable

EP 601

-

EP 630

 

 

EP 653

 

 

EP 655-T

Biokompatibel und autoklavierbar

-

-

EP 630

 

 

EP 653

 

 

EP 655-T

|

Polytec EP 501

  • Number of Components: 1
  • Typical Cure Schedule: 150 °C / 10 minutes
  • Operating Temperature: -55 °C ... 180 °C
  • Consistency: flowable paste
  • Features: transparent, clear glob top and optical adhesive

|

Polytec EP 601

  • Number of Components: 2
  • Typical Cure Schedule: 23 °C / 16 hours
  • Operating Temperature: -55 °C ... 125 °C
  • Consistency: liquid 
  • Features: USP class VI compliant, transparent, clear optical adhesive

|

Polytec EP 601-T

  • Number of Components: 2
  • Typical Cure Schedule: 23°C / 16 hours
  • Operating Temperature: -55 °C ... 125 °C
  • Consistency: thixotropic paste
  • Features: non-flowing adhesive, no reduction in viscosity during cure

|

Polytec EP 610

  • Number of Components: 2
  • Typical Cure Schedule: 23 °C / 24-48 hours
  • Operating Temperature: -55 °C ... 150 °C
  • Consistency: low-viscosity paste
  • Features: flexible, clear epoxy for stress-free bonding of large optical components

|

Polytec EP 610-T

  • Number of Components: 2
  • Typical Cure Schedule: 23 °C / 24-48 hours
  • Operating Temperature: -55 °C ... 150 °C
  • Consistency: thixotropic non-flowing paste
  • Features: slightly thixotropic, non-flowing version of Polytec EP 610 

|

Polytec EP 630

  • Number of Components: 2
  • Typical Cure Schedule: 150 °C / 5 minutes
  • Operating Temperature.: -55 °C ... 230 °C
  • Consistency: pourable liquid
  • Features: USP class VI compliant, withstands >1000 autoclave cycles, medical, fiberoptics

|

Polytec EP 630-LV

  • Number of Components: 2
  • Typical Cure Schedule: 150 °C / 5 minutes
  • Operating Temperature: -55 °C ... 230 °C
  • Consistency: liquid
  • Features: autoclavable, extremely moisture resistant, potting of dies, arrays, cavities

|

Polytec EP 653

  • Number of Components: 2
  • Typical Cure Schedule: 150 °C / 5 minutes
  • Operating Temperature: -55 °C ... 230 °C
  • Consistency: flowable liquid
  • Features: USP class VI compliant, >500 autoclave cycles, fiber optics, medical, sensor applications

|

Polytec EP 653-T

  • Number of Components: 2
  • Typical Cure Schedule: 150 °C / 5 minutes
  • Operating Temperature: -55 °C ... 230 °C
  • Consistency: thixotropic non-flowing paste
  • Features: non-flowing version of Polytec EP 653 for dam and fill processes, fiber optics, electronics

|

Polytec EP 655

  • Number of Components: 2
  • Typical Cure Schedule: 80 °C / 90 minutes
  • Operating Temperature: -55 °C ... 320 °C
  • Consistency: liquid
  • Features: extremely moisture and chemical resistant epoxy. Its tough-elastic properties allow assemblies and potting of substrates with dissimilar coefficients of thermal expansion. Polytec EP 655 has passed > 100 autoclave steam cycles.

|

Polytec EP 660

  • Number of Components: 2
  • Typical Cure Schedule: 120 °C / 30 minutes
  • Operating Temperature: -55 °C ... 240 °C
  • Consistency: pourable liquid
  • Features: high-temp epoxy impregnation and adhesive, extremely moisture and chemical resistant

|

Your Contact

Epoxy Adhesives
Mr. Dirk Schlotter

Tel. +49 7243 604-4110
d.schlotter@polytec-pt.de

Product Brochure [PDF]

Data Protection

This website uses cookies. If you continue to use the website, we assume your consent.

Learn more about the use of cookies Close